The climbing frame electric hoist is also known as the "group hoist electric hoist". It retains the light and convenient characteristics of the chain hoist, and improves the lack of manual operation of the chain hoist. It combines the advantages of the electric hoist and the chain hoist. Use disc brake motor to do the work. The group hoist is a low-speed electric chain hoist with light weight, simple installation, flexible operation and control, and convenient use.
1. After troubleshooting the crane pulley accident or the fault caused by the abnormal mechanical contact, determine the measures to eliminate the winding fault. The group hoist is a low-speed electric chain hoist with light weight, simple installation, flexible operation and control, and convenient use.
2. Directly disassemble all the entangled cranes, redesign the towing line, and install another one properly.
3. Separate the entangled lifting of the crane by compulsory requirements, that is, install a separate processing device at the two position sections that do not affect the normal lifting section.
4. The crane lifts back and forth several times to extend the winding stress to the direction of the reel. Finally, when the roll is full, try to secure it, and then remove the fixing device at the end of the roll. Put down the reel to make it free, and the internal stress is naturally released.
Afterwards, it will be restored to its original state again, and the upper end of the reel is not properly fixed. This method can be repeated several times until the winding stress can be eliminated so far.
In the future, you can refer to the 4 tips to solve the trouble of the climbing frame electric hoist in the future. In addition, the climbing frame electric hoist should pay attention to daily maintenance, which will help improve work efficiency and service life, like ours The climbing frame electric hoist has detailed instructions for use, which can help you quickly solve the fault and make it more convenient and faster to use
