When the climbing frame electric hoist is used for a period of time, it is necessary to carry out regular maintenance work on the equipment. Generally, regular maintenance does not require disassembly of the equipment, but if it is used for a longer time or after the project ends, for example, When the product needs to be overhauled on a large scale, it needs to involve the disassembly and installation of the climbing frame electric hoist. Next, I will tell you how to disassemble and install. First of all, when disassembling the climbing frame electric hoist, make sure that the equipment is not connected to electricity. The electric hoist should be disassembled by a disassembly professional. If you do not understand the internal structure of the climbing frame electric hoist, do not disassemble it yourself. The first step is to disassemble the housing cover and the motor, and then the outer coupling. During disassembly and assembly, care must be taken to avoid damage to the equipment. Then find the spring for positioning. At this time, you need to completely disassemble the deceleration part. Remember to disassemble the bearing in the reducer, because it is a part that is prone to wear. At this time, most parts of the climbing frame electric hoist have been disassembled. Briefly explain the process to everyone. The first step is to disassemble the outer cover, screws and nuts, and then disassemble the mechanical parts and electrical parts inside. One thing to note is that the electrical parts should not be moved as much as possible. Check whether the electrical parts are aging or damaged or need to be replaced. The mechanical parts can be completely disassembled. At this time, wait for the climbing frame electric hoist to complete the disassembly and maintenance, and then install it in the original order.