Climbing frame electric hoists are widely used in construction projects. In the daily work process of everyone, operators will inevitably encounter more or less problems with climbing frame electric hoists. These problems are often very confusing for us. Next, I will talk to you Talk about how to deal with common problems of electric hoist:
(1) When the hoist motor makes an abnormal noise when it is running, it should stop running immediately, and then check whether the motor is running normally to see if the parts are damaged, whether it is single-phase operation or shaft misalignment, abnormal noise will occur. During the inspection, you should listen and watch more and determine the location of the fault according to the location of the fault sound, find and dispatch the fault.
(2) It is found that control appliances, motors or reducers are often accompanied by noise. We need to listen more for such situations. The noise caused by faults in different parts is also different. You should take measures according to the different faults and the location of the problem. It is easy to distinguish the location of the fault after we are familiar.
(3) If there is a problem with the reducer, you should stop running immediately to check whether the motor complies with the rules of use, whether it is added according to the instructions before use, and replace the lubricating oil in time. If it does not cause serious bearing wear and other problems, we should Timely maintenance to reduce the occurrence of accidents.