Recommended News

Industry News

Working principle of group hoist

2020-08-15 08:48:15Beijing Lieying
The main working parts of the group hoist can be divided into: lifting, driving, lifting, braking, etc., which can be said to be the four major power devices of the equipment. Its working principle is divided into the following two points
1. Turn on the power and give the lifting command through the intelligent control box system. The driving component converts the lifting power input into mechanical energy, and transmits the lifting and operating speed to the lifting device. 2. The lifting device closely cooperates with the heavy object and the hoist to complete the lifting task of the heavy object. Summary: The movable metal frame is combined into a whole, and the lifting is completed through the power process of the group hoist. The placement of the hoist must be carefully scrutinized to allow this product to exert higher work efficiency. Operating guidelines for group hoist: 1. Do not use the chain as a sling to avoid the chain going out of the groove; 2. When operating, remember not to press the two drive buttons at the same time; 3. Do not put your hands on the hook part when the machine is running The top or touching the slow-running chain; 4. The group hoist cannot be overloaded and cannot be used for human lifting; 5. After the group hoist is completed, the empty hook should be raised to a uniform height, and all Power cut off.

Previous: Dangerous factors of climbing frame electric hoist

Next: Matters for using group crane electric hoist