It is strictly prohibited to use the climbing frame electric hoist to pull diagonally, overload, and to rise and fall rapidly. Climbing frame chain electric hoists are widely used in group hoisting work in various places such as building climbing, welding tank group hoisting, etc. If shaking occurs during the group hoisting process, the suspended object will easily lose balance, and even a series of bumps will occur. The occurrence of accidents such as falling objects and loads will affect the normal operation of the climbing frame electric hoist. The following accumulated protection work should be done in daily work
1. It is strictly forbidden to pull and hang diagonally. If diagonal pull occurs during the climbing frame, stop working immediately and work after correction. 2. Rapid lifting is strictly prohibited. In this case, the power supply should be cut off first. After the electric hoist is stable, continue to lift steadily and slowly. (When starting and stopping the lateral movement of the electric climbing frame electric hoist, there will also be shaking when lifting fast, so the lifting should be done smoothly.)
3. It is strictly forbidden to use it with overload. Choose a suitable climbing frame electric hoist to ensure that the lifting weight is greater than the weight of the object to be hoisted and will not be overloaded. Note that in the process of scaffold climbing, careful debugging must be performed to ensure that the equipment can be operated synchronously before use to prevent tilting and overloading caused by asynchronous operation.