The electric hoist of climbing frame and group crane is generally applicable to the lifting of climbing formwork of construction engineering. The safety precautions for the electric hoist of climbing frame or group crane in use are as follows:
1. During the lifting and lowering process of electric hoist of climbing frame and group crane, the staff must observe the working condition of electric hoist of climbing frame and group crane and the condition of external frame and buildings, and set up anti falling safety device,
2. When the climbing frame electric hoist and group crane electric hoist rise and fall, the chain shall be closed at the same time to prevent
The electric hoist of climbing frame or group crane fails and falls down. During the lifting interval, the safety supervision personnel shall check the insulation, leakage and mechanical wear of the power line, climbing electric hoist and central control cabinet,
3. Maintain and commission the electric hoist of climbing frame and group crane
In a good performance state, check the construction of the outer frame bowl buckle, fastener and climbing frame system, check whether the connection is loose, deformed and invalid, and timely repair in case of any abnormality to ensure that the overall outer frame node connection is reliable and the operation is safe.
4. When the climbing frame is lifted and lowered, it is strictly prohibited to stand around the building and assign a special person for supervision. During the lifting process, there shall be no other personnel on the outer frame except the operator of the central control cabinet, and it is strictly prohibited to put the construction personnel and materials on the frame.
5. Non professional technicians are not allowed to dismantle the components of electric hoist of climbing frame and group crane at will. If the electric hoist of climbing frame or group crane cannot operate normally, please send personnel from the manufacturer for maintenance,
6. The central control cabinet has reliable lightning protection and grounding measures, which are connected with the electric hoist of climbing frame or group crane
The wiring shall be reliably insulated from the outer frame. The operation room of the control cabinet shall be equipped with fire extinguishers. The operator of the control cabinet shall be a formal electrician with certificate, and shall carry electrical tools with him,
7 cut off the power supply and lock the control cabinet door before leaving the operation platform;
8 in case of poor visibility or bad weather at night, it is forbidden to lift the climbing frame.
9. The climbing frame electric hoist, group crane electric hoist and control cabinet shall be properly kept after being unloaded, so as to prevent rain, sun, moisture and pollution. Before use, comprehensive inspection shall be conducted again.
These are some matters that should be paid attention to when using the electric hoist of climbing frame and group crane. I hope it can help you.
Please read the manual carefully before use. If you want to know more about the electric hoist of climbing frame or group crane, please pay attention to our website.
