Climbing frame electric hoist is one of the group hoisting electric hoist. The product has a wide range of application fields, its lifting speed is relatively slow, and the hardness of the machine is high, the wear is relatively small, so it is very popular among everyone. -Type brake motor for work The speed reducer has the advantages of compact structure, convenient use, reliable braking and simple maintenance. Next, let's talk about the storage of climbing frame electric hoist. Storage standard of climbing frame electric hoist
1. After the project is completed, the electric hoist of the climbing frame needs to be stored in a ventilated space (if it gets wet, it needs to be wiped dry and stored).
2. The chain must be smooth and tidy to ensure that each climbing frame electric hoist is stored in an orderly manner to prevent the chain from rusting and entangled when it is used again, which makes it unusable.
3. The electric hoist for climbing frame should be maintained at least 4 times a year, such as cleaning the parts with diesel oil and lubricating with calcium-based grease.
4. Since the electric hoist of climbing frame is operated in the open air with a lot of dust, the group hoist electric hoist that is not usually used should wear an electric hoist protective jacket, and remember to store it directly in the open air. Construction standards for climbing frame electric hoist 1. Construction personnel should abide by the relevant provisions of the current "Technical Specifications for Safety in Construction at Heights" (JGJ80) and "Safety Technical Operation Rules for Construction Workers" ([80] Jiangong Lao Zi No. 24) Regulations. Personnel of all types of work should be basically fixed, and hold posts with certificates. 2. The electricity used for construction shall comply with the requirements of the current "Technical Specifications for Safety of Temporary Electricity at the Construction Site" (JGJ46-2005). Operation rules of climbing frame electric hoist 1. Before each climbing frame electric hoist is lifted, it should be tested with no load to check whether the machine is running normally. If there is any abnormality, the cause must be found out and will be used after repair. 2. Before using the climbing frame electric hoist, carefully check whether the wire rope, hook, hanging climbing and other parts are intact. 3. It is strictly forbidden to stand under the climbing electric hoist hook during operation. Those who operate the climbing electric hoist should take the initiative to avoid and prevent unrelated personnel from entering the work area. 4. The operator must concentrate on working closely with the partner to lift the crane while ensuring safety, and talking and laughing are strictly prohibited during the operation. 5. The electric hoist of the climbing frame should be regularly inspected, repaired, and maintained to keep the equipment in good condition at any time. 6. The operating hoist electric hoist is operated by a special person, and it is strictly forbidden to irrelevant personnel to drive and lift casually. The power supply should be cut off in time after use.