The electric hoist of climbing frame is usually used after a period of time, it needs regular maintenance work. Generally, the regular maintenance work does not need to disassemble the equipment, but when it is used for a longer time, for example, it requires large-scale When overhauling, it will involve the disassembly and assembly of the climbing frame electric hoist. Below we will introduce the dismantling steps of the climbing frame electric hoist.　　First, when starting the disassembly of the electric hoist of the climbing frame, make sure that the equipment is not connected to power. You need to find a professional who understands the structure of the equipment to disassemble it. If you do not understand the internal structure of the electric hoist of the climbing frame, remember not to disassemble it yourself. The first thing to disassemble is the housing cover and the motor, and the next is the outer coupling. Be careful during the disassembly and assembly process to avoid damage to the equipment. Then find the spring for positioning and completely remove the deceleration part. Don't forget to remove the bearing in the reducer, because it is also a position where wear is more likely to occur. In this way, all the major parts of the climbing frame electric hoist have been disassembled. To give you a complete summary of the disassembly process, the first step is to remove the outer cover, screw and nut, and the second part is the mechanical and electrical parts inside. The thing to note here is that the electrical parts should not move as much as possible. Check whether the components are aging or damaged and need to be replaced. Other mechanical parts can be completely disassembled. After the disassembly and maintenance of the climbing frame electric hoist are completed, they can be installed back in the original order.