Climbing frame electric hoist management rules and regulations: 1 Climbing frame electric hoist must be operated by a dedicated person, hold a certificate to work, and strictly abide by the relevant safety operation regulations of the driver. 2 Before using the climbing frame electric hoist, the mechanical part and electrical part of the equipment should be checked. The steel wire rope, hook, rope guide, limiter, etc. should be intact, the electrical part should be free of leakage, and the grounding device should be good. 3 Crawler electric hoist should be provided with buffers, and baffles should be provided at both ends of the track. 4 When the hoisting operation of the electric hoist starts for the first time, the heavy object should be stopped when it is lifted 100mm from the ground. Check the braking situation of the electric hoist and confirm that it is in good condition before the official operation. The brake should be debugged by professional maintenance personnel. 5 The electric hoist of climbing frame is strictly prohibited to be overloaded. When lifting, the ring must be held between the rope and the object, and the collision should be strictly prevented when the lifting object rises. 6 Lifting objects should be bundled firmly. When the electric hoist of the climbing frame is used to lift heavy objects, the heavy objects should not be more than 1.5m high from the ground. Do not suspend heavy objects in the air during work. 7. Abnormal odor, high temperature and other abnormal conditions in the operation of climbing frame electric hoist should be immediately stopped and checked, and the fault can be continued before use. 8 When using the suspension cable electrical control switch, the insulation should be good, the sliding should be free, the person should have 2m of open space behind the standing position, and the button should be operated correctly. 9 When the electric hoist of the climbing frame is hoisted, due to the failure caused by the uncontrolled fall of heavy objects, emergency measures must be taken to drop the heavy objects to no one. 10 It is strictly forbidden for one person to operate two or more at the same time. Climbing frame electric hoist. 11 Do not ascend or descend rapidly during lifting. 12 Climbing frame. When the electric hoist brakes at rated load, the sliding displacement should not be greater than 80mm. Otherwise, remove oil or replace the brake ring. 13 After the operation is completed, it should be parked at the designated position, the hook is raised, and the power is cut off, and the switch box is locked. Driver
Climbing frame electric hoist must do "ten not hang"
1. The management does not suspend the violation of command
2. The weight is unknown
3. The sling and accessories are not tied tightly and do not meet the safety requirements.
4. The crane does not hang the heavy objects directly for processing
5. Tilt, hang, hang, not hang
6. People who stand on the work piece or put moving items
7. Oxygen cylinders, acetylene cylinders and other items with explosive hazards are not hoisted
8. Do not hang with edges and corners that are not padded
9. Objects buried underground are not suspended
10. Do not hoist beyond the rated load