1. Each stand of the electric hoist of climbing frame must ensure three supports, which can be two supports when lifting.
Second, each climbing frame electric hoist support must have anti-fall, anti-tilt devices and load-bearing jacks.
3. Each climbing frame electric hoist support (steel beam, assembly support, plate beam) must ensure double bolts and the bolts must be exposed with three wires. 4. Putting bolts through the wall (two horizontal or-horizontal-vertical). 5. The bottom of the electric hoist of the climbing frame and the third step flap must not be missing (note: the size of the flap should not be less than 45cm).
6. No material should be stacked on the climbing hoist frame. 7. Turn off the switch of the small electric box in time after the lifting of the electric hoist frame of the climbing frame is completed, unplug the electric hoist plug of the climbing frame and fix the wire reel, and the control cabinet is powered off and the large plug is unplugged. 8. It is forbidden to use the frame to support the steel mold and formwork. 9. It is forbidden to dismantle and move the safety protection measures on the frame. 10. It is forbidden to arbitrarily remove frame members or loose connections. 11. It is forbidden to use frame to transfer materials. 12. When lifting the frame, there must be no less than 3 persons supervising and inspecting the lifting of the frame in different positions. 13. During the lifting of the frame, no one is allowed to work and move around on the frame.
14. It is forbidden for operators to get on the job after drinking. Fifteen, mobilize climbing frame electric hoist, through-wall bolts, load-bearing jacks regularly oil maintenance (at least once a month). 16. The debris and garbage on the rack should be cleaned up in time. 17. Regularly check whether the bolts on the rack body are loose. 18. The electric hoist pre-stress must not exceed 8 hours.