The building climbing frame electric hoist is also called the synchronous climbing frame electric hoist. It is controlled by the power distribution cabinet and can ensure that each group of electric hoist runs synchronously. The building hoist electric hoist is an important part of the climbing frame, also called the group hoist electric hoist. The climbing frame structure is composed of three parts: a bowl buckle rack or a common steel pipe fastener rack, a building climbing frame electric hoist, and a control cabinet. In layman's terms, it can be used regardless of whether the building is more than a dozen or dozens of floors. The external wall scaffolding, equipped with the building climbing frame electric hoist as the hoist, and the electric control box as the operation control center system, can meet the construction requirements of the cabinet frame structure, shear wall structure and cabinet shear structure. This climbing frame electric hoist The biggest advantage is that the existing materials of the construction unit are used, and the traditional erection method is adopted, which can have multiple effects such as safety and reliability, easy operation, reduced yard, saving materials, and improving work efficiency.
Taboo of climbing frame electric hoist Climbing frame electric hoist is a common small lifting equipment. The operation is relatively simple to use, but safety issues need to be taken seriously and cannot be ignored. In some special cases, electric hoist cannot be used. If it is forcibly used, it may cause danger.
1. The construction environment is dark and there is no lighting. The person operating the electric hoist cannot see the suspended objects and the command signal at all. It is forbidden to work in this environment.
2. There is an object on the item, or someone must clean it up before lifting.
3. The suspended objects should stop running when shaking or diagonally pulling
4. There is a problem with the electric hoist equipment of the climbing frame. If the chain is used for a long time to reach the scrapped state, or other parts are worn out, it must be replaced in time.
5. The overloading of the electric hoist crane of the climbing frame must not exceed the maximum load of the equipment.