The electric hoist of climbing frame is a kind of light and small hoisting machinery. This product has the high-quality characteristics of light weight, high hardness of the machine parts, small wear and so on. It has been widely used by enterprises now. So what are the speed regulation methods for the electric hoist motor of climbing frame? Here are six ways to adjust the speed of the electric hoist motor of climbing frame: (1) The electric hoist motor of the climbing frame adopts rotor resistance speed regulation. The advantage is that the structure is simple and the cost is low, but the speed changes greatly and the intermediate speed is relatively stable. (2) The motor's self-excited braking speed adjustment has the advantage that when the heavy object falls, it has two gears of medium speed and high speed, and the energy saving is safe and reliable. However, stable low speed cannot be obtained during ascent, light speed cannot be adjusted, and operation is inconvenient (3) The hydraulic push rod is used for speed regulation, and a high-value resistance is connected through the motor rotor. The system can obtain a stable low speed when ascending and descending. But it can only get a low speed, the middle speed characteristic is soft, and must be modified to use the crane mechanical part. (4) The motor adopts eddy current braking to adjust the speed. In this way, the speed can be adjusted up and down, the speed ratio can reach 1: 10, and the intermediate speed and low speed can be obtained. However, the speed changes greatly, the intermediate speed cannot be operated for a long time, the circuit is more complicated, and the crane mechanical part must be modified to use. (5) Thyristor stator voltage regulation and speed regulation, thyristor stator voltage regulation and speed regulation, the speed regulation range can reach 1:10, the speed change rate is less than 5, the rise and fall can be adjusted speed, and has certain development prospects. However, this solution is complicated and difficult to debug. (6) Frequency conversion speed regulation, frequency conversion speed regulation is an ideal scheme, the speed regulation ratio can reach more than 1:10, and can realize stepless speed regulation. The mechanical characteristics of each gear speed are very hard, and the heavy-duty low-speed start and operation are stable and reliable. The acceleration and deceleration time settings make the braking speed of each gear quite stable. It has high control precision, designed with fault display, analysis and parameter monitoring functions, which is easy to use and maintain, and easy to realize automatic control and remote control.