Command climbing frame electric hoist operation specification
1. The lifting command must be at least 18 years of age (including 18 years of age), vision (including corrected vision) of 0.8 or above, no color blindness, hearing can meet the requirements of working conditions, physical health and no history of disease. 2. You must be trained in safety technology before work, pass the assessment, and issue a safety operation certificate before you can engage in command. 3. The commander must strictly implement the GB 5082-85 standard and be accurate when communicating with the lifting operator. 4. Commanders should be familiar with the "Safety Regulations for Lifting Appliances" | (GB 6067-85) and "Safety Regulations for Lifting Appliances and Slings" (LD 48-93). 5. The command staff must be familiar with the technical performance of the designated lifting equipment before commanding. 6. Commanders cannot interfere with the correct choice of crane operators. 7. When you start to command the lifting load, use the micro signal to command. When the load is 100~200mm away from the ground, stop the lifting and test the crane. After confirming the safety and reliability, you can use the normal lifting signal to command the lifting. 8. When the command crane is operating in rain and snow, it should be tested first, and the brake must be sensitive and reliable before lifting.9. Responsible for weight calculation of correct load and correct selection of rigging. 10. Commanders need to take necessary precautions against possible accidents. 11. Commanders should wear distinctive signs and special-colored helmets. 12. The commander shall have safety measures to protect the personal and equipment at the landing site when issuing a hook or load down signal command.